B板的细节，总体不错，开模工整，很少飞边
![[开盒评测]号手-1/144](http://ftp.metaltankmodel.com/wp/2017/09/201011032152106194_500.jpg "[开盒评测]号手-1/144")
![[开盒评测]号手-1/144](http://ftp.metaltankmodel.com/wp/2017/09/201011032152503157_500.jpg "[开盒评测]号手-1/144")
![[开盒评测]号手-1/144](http://ftp.metaltankmodel.com/wp/2017/09/201011032153192371_500.jpg "[开盒评测]号手-1/144")
![[开盒评测]号手-1/144](http://ftp.metaltankmodel.com/wp/2017/09/201011032153523218_500.jpg "[开盒评测]号手-1/144")
![[开盒评测]号手-1/144](http://ftp.metaltankmodel.com/wp/2017/09/201011032154165690_500.jpg "[开盒评测]号手-1/144")
指挥外壳，就算有细节吧
![[开盒评测]号手-1/144](http://ftp.metaltankmodel.com/wp/2017/09/201011032155114072_500.jpg "[开盒评测]号手-1/144")
应急逃生口感觉不错，上色时不用遮盖了
![[开盒评测]号手-1/144](http://ftp.metaltankmodel.com/wp/2017/09/201011032156140824_500.jpg "[开盒评测]号手-1/144")
![[开盒评测]号手-1/144](http://ftp.metaltankmodel.com/wp/2017/09/201011032156503545_500.jpg "[开盒评测]号手-1/144")
前水平舵，由于零件背面的推出孔太深，以致正面都有凸痕了，制作时还要处理
![[开盒评测]号手-1/144](http://ftp.metaltankmodel.com/wp/2017/09/201011032158143546_500.jpg "[开盒评测]号手-1/144")
前水平舵背面的推出孔，所有面积稍大的零件都有推出孔，好在完成后都看不到
![[开盒评测]号手-1/144](http://ftp.metaltankmodel.com/wp/2017/09/201011032159398840_500.jpg "[开盒评测]号手-1/144")
这个作者貌似有点懒，什么都没有留下。
2017
09-23
09-23
[开盒评测]号手-1/144″基洛”级常规潜艇(05903)-封绘及简介